Using the universal stand allows you to use your panel light while lying down, and its smooth-rolling wheels make it easy to move the device wherever you need it. Below are the step-by-step instructions for assembling the stand.
Step 1 — Install the base plate and main pole
Lock all 4 wheels before assembly. Attach the main pole to the base plate and tighten the 4 CM6*10mm screws until fully secured.
Step 2 — Install the mounting clips on both sides of the light
Lay the panel light on its side with one edge flat on the floor. Install the first mounting clip and tighten the 4 screws. Repeat on the opposite side, ensuring both mounting clips are aligned evenly.
Step 3 — Install the Crossbar
Insert the crossbar into the 2 mounting clips and tighten the 2 screws until they no longer turn.
Step 4 — Combine the mail stand with the panel light
Slide the main pole fully into the crossbar until it reaches the reference line. Tighten the screws on the main pole until fully secured.
Safety Notes
- Always have at least 2 persons work together during installation process.
- Keep the wheels locked at all times during the installation process.
- Make sure there are no children or pets near the installation area.
- Turn the screw clockwise until it just contacts the surface, then give it an additional half turn.
Contact us!
If you have any installation issues or need assistance mounting the stand to panel lights from other brands, please contact us for prompt after-sales support. We’re here to provide the right solution for you.
- For Amazon store customers: bestqoolamz@gmail.com
- For official website customers: help@bestqool.com
- Contact us via Whatsapp: +1 319-512 (3212)
Small
Moderate
Moderate
Moderate
Full
